Tel:
Jiaxing Burgmann Mechanical Seal Co., Ltd. Jiashan King Kong Branch
Jiaxing Burgmann Mechanical Seal Co., Ltd. Jiashan King Kong Branch

Superior mechanical seals that reduce operatting costs and improve system reliability from shutdown to shutdown~

Home News

Precautions for installation of centrifugal pump seals

Company News
Precautions for installation of centrifugal pump seals
Latest company news about Precautions for installation of centrifugal pump seals

1, because the pump mechanical seals are generally applicable in clean, no suspended particles used in the media, therefore, the newly installed piping system and liquid storage irrigation, should be carefully rinsed clean, strictly prevent the solid ' body impurities into the mechanical seal end and make the seal failure.

 

2, in the easy crystallization of the medium, the use of mechanical seals should pay attention to frequent flushing.

Clean the crystallization on the mechanical seal before restarting after stopping.

 

3, disassembly of mechanical seals should be careful, do not use hammer, iron and other knocks, so as not to destroy the dynamic, static ring sealing surface.

 

4, if there is dirt can not be removed, should try to remove dirt, rinse clean and then disassemble, so as not to damage the sealing elements.

 

5, before installing the mechanical seal, should check whether all sealing elements have failure or damage, if any, should be re-repaired or replaced. 6, should strictly check the dynamic ring and static ring of the relative friction sealing surface, do not allow any minor scratches, bumps and other defects. All other parts, including pump body, impeller, sealing cavity, etc. should be rinsed clean before assembly, especially the moving, static ring end surface, to be carefully wiped clean with clean, soft cloth or cotton yarn, and then coated with a layer of clean grease or oil.

 

JIAXING BURGMANN MECHANICAL SEAL CO., LTD

Contact person: Doris Sun 

Phone No: 8615381220188

Skype: kathysunlin

 

Pub Time : 2018-12-26 15:21:31 >> News list
Contact Details
Jiaxing Burgmann Mechanical Seal Co., Ltd. Jiashan King Kong Branch

Contact Person: Mrs. Doris Sun

Tel: 86-15381220188

Fax: 86-0573-84072317

Send your inquiry directly to us
Jiaxing Burgmann Mechanical Seal Co., Ltd. Jiashan King Kong Branch
No. 28 No. 28 Chengxi Road, Jiashan County, Jiaxing, Zhejiang, China 314100
Tel:86-0573-84133388
Mobile Site Privacy Policy China Good Quality Industrial Mechanical Seals Supplier. © 2018 - 2021 industrial-mechanicalseals.com. All Rights Reserved.